About This

• 🎆【30W Remote Control Aquarium Light】The main material of this light is aluminum alloy, with ultra-thin fast heat dissipation and high luminosity,Light beads use high brightness 5050 and 2835 led lamp beads, strong penetration in water.Remote control signal can be received within 98 ft distance without obstacles and within 32 ft with obstacles.30W light have total of 96 light beads, 48 white, 8 green, 8 red, 8 blue, 24 RGB,Lumen is 700lm,Suitable for fish tanks within 32-40inch.
• 🎆【RGB Color Ring Infinitely Adjustable Color】High sensitivity touch screen remote control，Slide finger on the inside and outside 2 color rings to change the light color.ditch the complicated color settings for infinite light color adjustments!Outer RGB color ring can select different single colored light,the inner RGBW color ring have7 RGBW modes,red, blue, green and white light bead with an red/orange/yellow/green/cyan/blue/purple either one of these light clolor bar combinations.
• 🎆【10 Brightness and 2 Full Spectrum Mode】There are 10 levels of brightness adjustment 10%-20%-30%-40%-50%-60%-70%-80%-90%-100%.Press the bulb button there are 2 full-spectrum mode, one is RGB full-spectrum light beads that is the light board in the middle of a line, the mode of living things have the effect of color enhancement, and the second is composed of white, blue, red and green light beads, the mode is conducive to the growth of plants.Brightness cannot be adjusted in full-spectrum mode.
• 🎆【9 Dynamic Light Mode】There are 9 dynamic light modes,3-color jump/7-color jump/3-color gradient/7-color gradient/7-color transition gradient/3-color sequential flash/7-color sequential flash/3-color sequential burst flash/7-color sequential burst flash.3-color light beads refer to red green and blue bead,and 7-color light beads refer to red green blue yellow cyan purple white bead.10 change speeds available for each mode.Dynamic light buttons cycle 9 modes,white light means the end of the mode.
• 🎆【3 Light Modes Can Be Archived】One button can store a light color and brightness, which can be quickly accessed.Operation method: Set the light color and brightness first, then long press the button until the light quickly turns off and then turns on again to successfully store it.(The scene function can still be turned on with one button when the remote control is powered off).Also have memory function,after a power outage,the light will reopen with the previous lighting settings by default.

Overview

• Finish Type : Painted
• Base Material : Aluminum alloy
• Lamp Type : LED
• Shade Color : Multicolor
• Shade Material : Aluminum